[nsp] sup720 acl debugging
dmitry.volkov at rogers.com
Mon Feb 16 08:30:17 EST 2004
Do You know if it's fixed in 12.2(17a)SX2 ?
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Andrew Fort
> Sent: Monday, February 16, 2004 2:56 AM
> To: rajeshbansal9 at aol.com
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] sup720 acl debugging
> On 15/02/2004 4:51 AM, rajeshbansal9 at aol.com wrote:
> >The rev that we are running is 12.2(17a)SX1. This is
> documented in CSCec78265.
> >Pretty lame that stuff like this missed the QA group.
> Or, instead, you could have your Sup720 come up without its FlexWAN
> configuration.... like in CSCec17803. :) re-affirming the same
> configuration register setting "fixes" this one.. (what the...?)
> Then again... I wouldn't mind having CSCec17803 on my FlexWAN ATM
> interfaces when I had CSCec78265 occur on my switch where I'd enabled
> debugging on an ACL applied to the FlexWAN ;-).
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp