[nsp] CT3IP & 7507

[jlewis at lewis.org]

On Mon, 16 Feb 2004, Beprojects.com wrote:

> First, when I configure the framing, my choices are c-bit or m23.  I want
> this to act as 28xT1, so I would think it should be M13.  Is this just a
> strange Cisco thing that they actually call it M23 instead of M13?

Assuming this works like the newer MC-T3 cards, you want M23, which is 
likely the default.

> Second, when I configure the DS1's, they don't show up under the controller
> for some reason.  They are configured and they show up as serial lines, but
> I don't see the "t1 1 time 1-24 speed 64" like I would think I would.  When
> I do this on a CT1 card, I see the T1 group or PRI group, but not on this
> card.  Is that usual?

You have to create them.
controller T3 0/0/0
 t1 1 channel-group 0 timeslots 1-24
 t1 2 channel-group 0 timeslots 1-24
 ...
 t1 28 channel-group 0 timeslots 1-24

Once you've done that, serial0/0/0/1:0 ... serial0/0/0/28:0 should exist.

----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________