[nsp] Routing between VRF VPNs?

[Steve Francis]

Much thanks to all that replied. I got a few variations - all good.
THanks

Harold Ritter wrote:

> Steve,
>
> I don't know if anybody has answer this question yet. You can indeed 
> route from one VRF to another on a local router as long as you specify 
> the physical interface as part of you static route as follow:
>
> ip route vrf customerA 192.168.20.0 255.255.255.0 se2/0
> ip route vrf customerB 192.168.21.0 255.255.255.0 se3/0
>
> At 01:24 PM 2/13/2004 -0800, Steve Francis wrote:
>
>> Is it possible to statically route from one VRF into another VRF on 
>> the same router?
>>
>> Thx
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> Harold Ritter, CCIE 4168 (R&S / SP)
> Advanced Services - SP East
> Cisco Systems
> 1414 Massachusetts Avenue
> Boxborough, MA 01719 USA
> Phone: 978 936 1431
> Cisco Systems- "Empowering the Internet Generation."
>