[nsp] Routing between VRF VPNs?

[Harold Ritter]

Steve,

I don't know if anybody has answer this question yet. You can indeed route 
from one VRF to another on a local router as long as you specify the 
physical interface as part of you static route as follow:

ip route vrf customerA 192.168.20.0 255.255.255.0 se2/0
ip route vrf customerB 192.168.21.0 255.255.255.0 se3/0

At 01:24 PM 2/13/2004 -0800, Steve Francis wrote:
>Is it possible to statically route from one VRF into another VRF on the 
>same router?
>
>Thx
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/

Harold Ritter, CCIE 4168 (R&S / SP)
Advanced Services - SP East
Cisco Systems
1414 Massachusetts Avenue
Boxborough, MA 01719 USA
Phone: 978 936 1431
Cisco Systems- "Empowering the Internet Generation."