[nsp] Cisco 2MFT E1 to G703

sthaug at nethelp.no sthaug at nethelp.no
Wed Feb 18 05:12:49 EST 2004

> > Actually the -E1 will do just fine in that situation also if you control
> > both ends (because then you can run them at 1984 kbps / 31 time slots).
> OK, thanks for clarifying.  So effectively, the -E1 should be able to run
> any kind of 2Mbit G.703 line, but on a "unstructured" line, you'll "waste" 
> 64kbit/s due to having to run "framed"?


You can also run two routers with -E1 back to back with just a TP crossover
cable between them (1-2/4-5 crossover).

Steinar Haug, Nethelp consulting, sthaug at nethelp.no

More information about the cisco-nsp mailing list