[nsp] Cisco 2MFT E1 to G703

[Gert Doering]

Hi,

On Wed, Feb 18, 2004 at 10:46:50AM +0100, sthaug at nethelp.no wrote:
> > If it's a "naked" 4-wire line, and you have to provide the framing
> > yourself, only the -E1-G.703 will do.
> 
> Actually the -E1 will do just fine in that situation also if you control
> both ends (because then you can run them at 1984 kbps / 31 time slots).

OK, thanks for clarifying.  So effectively, the -E1 should be able to run
any kind of 2Mbit G.703 line, but on a "unstructured" line, you'll "waste" 
64kbit/s due to having to run "framed"?

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de