[nsp] Cisco 2MFT E1 to G703

[sthaug at nethelp.no]

> This depends on the actual line you want to connect to it.  If it's a
> G.703/G.704 line with G.704 framing provided by the carrier, the -E1
> will do fine (as will the -E1-G.703).
> 
> If it's a "naked" 4-wire line, and you have to provide the framing
> yourself, only the -E1-G.703 will do.

Actually the -E1 will do just fine in that situation also if you control
both ends (because then you can run them at 1984 kbps / 31 time slots).

Steinar Haug, Nethelp consulting, sthaug at nethelp.no