[nsp] cheapest way to terminate channelized DS-3...

[Ejay Hire]

Hi.

Imho, a pa-t3-mc/pa-t3-mc+(4k-5k used) is the way to go.
There are very few places for it to break.  If you rally
want an alternate cheap solution, the other option is to get
a ads-3 mux ($1k used), wire it up to a patchpanel or
snapjacks  ($50), and then run the individual t's to
3xpa-mc-4t1 (500 each used)

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
Chris Hale
> Sent: Thursday, February 19, 2004 10:51 AM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] cheapest way to terminate channelized
DS-3...
> 
> All -
> 
> We want to bring in a channelized DS-3 to terminate
mutliple 
> T-1s.  We 
> don't really want to spend $4K for a channelized DS-3 card
for our 
> 7206.  I was wondering if someone else had a better
solution 
> at a much 
> better cost.
> 
> We'll be terminating about 10-12 T-1s for now.
> 
> Thanks,
> Chris
> 
> -- 
> Chris Hale
> Peak Networks, Inc.
> Motorola Authorized Canopy Solutions Provider
> 32 Third Avenue
> Burlington, MA 01803
> TEL:  781-425-6500
> FAX:  603-484-4770
> chris_at_peaknetworks.com
> http://www.peaknetworks.com
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/