[nsp] cheapest way to terminate channelized DS-3...
smunzani at comcast.net
Thu Feb 19 18:33:35 EST 2004
Questions is would you rather spend 4K onetime for DS3 or create a cable
mess to manage?
> Imho, a pa-t3-mc/pa-t3-mc+(4k-5k used) is the way to go.
> There are very few places for it to break. If you rally
> want an alternate cheap solution, the other option is to get
> a ads-3 mux ($1k used), wire it up to a patchpanel or
> snapjacks ($50), and then run the individual t's to
> 3xpa-mc-4t1 (500 each used)
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net
> > [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Chris Hale
> > Sent: Thursday, February 19, 2004 10:51 AM
> > To: cisco-nsp at puck.nether.net
> > Subject: [nsp] cheapest way to terminate channelized
> > All -
> > We want to bring in a channelized DS-3 to terminate
> > T-1s. We
> > don't really want to spend $4K for a channelized DS-3 card
> for our
> > 7206. I was wondering if someone else had a better
> > at a much
> > better cost.
> > We'll be terminating about 10-12 T-1s for now.
> > Thanks,
> > Chris
> > --
> > Chris Hale
> > Peak Networks, Inc.
> > Motorola Authorized Canopy Solutions Provider
> > 32 Third Avenue
> > Burlington, MA 01803
> > TEL: 781-425-6500
> > FAX: 603-484-4770
> > chris_at_peaknetworks.com
> > http://www.peaknetworks.com
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp