[nsp] RE: cisco-nsp Digest, Vol 15, Issue 59

[Chris Moore - GMD]

Being at ATM device, your Marconi/Fore switches will use 53 bytes for a bps
conversion.

IIRC, I think you can tell your switch to display either bps or cps in the
GUI. It's been awhile though.........

Regards,

Chris

---------- Original Message ----------------
Date: Wed, 25 Feb 2004 17:45:39 -0000
From: "Alex Foster" <afoster at gammatelecom.com>
Subject: RE: [nsp] Calculating ATM Cell transfer rates
To: <sthaug at nethelp.no>
Cc: cisco-nsp at puck.nether.net
Message-ID: <001e01c3fbc7$2fa82c00$040d000a at gammatelecom.com>
Content-Type: text/plain;	charset="us-ascii"

That now makes sense - will look at the debug to get 
a true feel.  To your knowledge do most vendors base 
their kbps on 53 byte cells - I mainly use Marconi
ATM products that require rates in cps not kbps -
makes life much easier. 

regards

Alex