[nsp] what line cards supports cisco's MQC (modular qos cli)

[Joe Lin]

sigh

too bad that link requires a valid cco login!

---- "Grant A. Kirkwood" <grant at tnarg.org> wrote:
> Joe Lin said:
> > Hi,
> >
> > On cisco's website, I was able to figure out what router models would
> > support MQC..
> >
> > But can someone point me to a link that tells me what line cards would
> > support MQC?
> 
> 
> Was just looking at this the other night. If you're meaning on the GSR:
> 
> http://www.cisco.com/warp/customer/63/mqc.html
> 
> Engine 0 through 4+, except 1.
> 
> 
> > On my 7505, it seems to only want to take the MQC commands when
> > attached to an interface on a VIP board
> 
> 
> Right, you can only do it on interfaces on a VIP2-50 or higher.
> 
> Cheers!
> Grant
> 
> 
> 
> 
>