[nsp] what line cards supports cisco's MQC (modular qos cli)

[Hank Nussbacher]

At 02:49 AM 26-02-04 -0500, Joe Lin wrote:

So try:
http://www.cisco.com/warp/public/63/mqc.html

:-)

-Hank



>sigh
>
>too bad that link requires a valid cco login!
>
>---- "Grant A. Kirkwood" <grant at tnarg.org> wrote:
> > Joe Lin said:
> > > Hi,
> > >
> > > On cisco's website, I was able to figure out what router models would
> > > support MQC..
> > >
> > > But can someone point me to a link that tells me what line cards would
> > > support MQC?
> >
> >
> > Was just looking at this the other night. If you're meaning on the GSR:
> >
> > http://www.cisco.com/warp/customer/63/mqc.html
> >
> > Engine 0 through 4+, except 1.
> >
> >
> > > On my 7505, it seems to only want to take the MQC commands when
> > > attached to an interface on a VIP board
> >
> >
> > Right, you can only do it on interfaces on a VIP2-50 or higher.
> >
> > Cheers!
> > Grant
> >
> >
> >
> >
> >
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/