[nsp] 3640 flash simm usage
Garcia Posse, Jorge
jgarciaposse at prima.com.ar
Thu Feb 26 14:43:05 EST 2004
No, there isn't an IOS command for show it.
Please check this URL: http://www.cisco.com/warp/customer/63/simm_config_3620_3640.html
Jorge Ignacio García Posse
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Burton Windle
Sent: Thursday, 26 February, 2004 4:31 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] 3640 flash simm usage
Without opening up a 3640 (with 16mb flash), is there any IOS
command that will show if the router has two 8mb SIMMS or one 16mb SIMM?
'sho flash chips' command looked promising, but I can't make
heads-or-tails of it.
Burton Windle bwindle at fint.org
cisco-nsp mailing list cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp