[nsp] Cisco 831 and NTP

[Temkin, David]

Did you try sntp ?

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ed Ravin
Sent: Wednesday, January 14, 2004 4:58 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] Cisco 831 and NTP


Cisco's Web site clearly documents that NTP is supported on the 831 in
the default feature set.  The Software Support for Features page also
indicates that NTP is supported in the release that my 831 arrived with,
namely 12.2(8)YN.

However, the "ntp" command is unrecognized at the configuration prompt.

Any ideas?
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments.  Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited.  Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument.  Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses.