[nsp] Router sizing

[Mark Prior]

Lajber Zoltan wrote:

> Unit1 should be 7200/NPE-G1 It has 3 Gi build-in, and you may use plus one
> Gi, and a few Fe.
> 
> A little bit more powerfull is the 7300 family, it has 2Gi and a
> Fe OoB build-in, but more Gi possible trough a "PCI port adapter card,
> don't expect wire-speed Gi.

The NPE-G100 cpu card has 3 GE ports and so a better comparison would be 
7206VXR/NPE-G1 and 7304/NPE-G100. The "native" port adaptors on the 7304 
are pretty sparse at the moment though so unless you need SONET/SDH or 
Ethernet (10/100 UTP) you need to fall back to 7200/7500 PA's.

Mark.