[nsp] Is the NM-1FE-TX supported by the 2621XM?

[Vincent De Keyzer]

Well, since I need to get 100 Mbps through, I cannot afford a VLAN trunk
that would, in the best of cases, divide the FE port in two 50 Mbps flows.

Or maybe Cisco makes a cheap 1-GigE router?...

Vincent

> -----Original Message-----
> From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
> Sent: mercredi 21 janvier 2004 16:58
> To: Vincent De Keyzer; cisco-nsp at puck.nether.net
> Subject: RE: [nsp] Is the NM-1FE-TX supported by the 2621XM?
> 
> 
> What about a vlan trunk or do you need the 3 FE for a reason 
> you can't use the Trunk? 
> 
> Scott
> 
> -----Original Message-----
> From: Vincent De Keyzer [mailto:vincent at dekeyzer.net] 
> Sent: Wednesday, January 21, 2004 2:07 AM
> To: cisco-nsp at puck.nether.net
> Subject: RE: [nsp] Is the NM-1FE-TX supported by the 2621XM?
> 
> Hmm... how do I get 3 FE ports on a 2621XM then?
> 
> Is it not possible? 
> 
> In which case, what platform can get 100 Mbps through (1500-bytes
> packets)
> and have 3 FE ports?
> 
> Vincent
> 
> 
> > -----Original Message-----
> > From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com]
> > Sent: mardi 20 janvier 2004 17:34
> > To: Vincent De Keyzer; cisco-nsp at puck.nether.net
> > Subject: RE: [nsp] Is the NM-1FE-TX supported by the 2621XM?
> > 
> > 
> > > 
> > > sorry for the dummy question: is the NM-1FE-TX supported by the
> > > 2621XM? Where can I find this on CCO?
> > 
> > It is not supported on 2621 (or any 26xx for that matter).
> > See 
> > http://www.cisco.com/en/US/products/hw/modules/ps2797/products
> _module_in
> stallation_guide_chapter09186a008007c8c4.html
> 
> 	oli
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco> -nsp
> archive at 
> http://puck.nether.net/pipermail/cisco-nsp/
>