[nsp] Catalyst 3524-XL default interface bug

Sorin CONSTANTINESCU adonay at dumnez.eu.org
Thu Jul 1 04:40:04 EDT 2004


Hi,

Almost a year ago, i ran into a bug in 12.0(5)WC7. When i used default
interface from 1 to 24, the switch reloaded. The crash can be repeated
every time if you run "default interface fast 0/x" for less than 30 times.

The output interpreter says only:

"Error : Could not decode symbols (IOS)"

The bug wasn't fixed till 12.0(5)WC9a.


=== cut here ===
adonay at krora adonay $ cu -s 9600 -l ttyS0
Connected.

Switch>en
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1 set to default configuration
Switch(config)#default interface fast 0/1
Building configuration...

Interface FastEthernet0/1
Exception (8192)! Debug Exception (Could be NULL pointer dereference)
CPU Register Context:
Vector = 0x00002000  PC = 0x0034D0D8  MSR = 0x00029200  CR = 0x59000050
LR = 0x0014B728  CTR = 0x0015E664  XER = 0x80001200
R0 = 0x0014B718  R1 = 0x00704400  R2 = 0x00000000  R3 = 0x00000000
R4 = 0x00704408  R5 = 0x00000000  R6 = 0x007043E0  R7 = 0x00000000
R8 = 0x00398E5D  R9 = 0x00398E5F  R10 = 0x007043E0  R11 = 0x00000001
R12 = 0x33000050  R13 = 0x00000000  R14 = 0x00000000  R15 = 0x00000000
R16 = 0x00000000  R17 = 0x00000000  R18 = 0x00000000  R19 = 0xFFFFFFFF
R20 = 0x00480000  R21 = 0x004D2C21  R22 = 0x00000000  R23 = 0x00000000
R24 = 0x00000000  R25 = 0x003A0000  R26 = 0x0053A4B4  R27 = 0x00691A08
R28 = 0x0070447C  R29 = 0x004F5AF8  R30 = 0x00543598  R31 = 0x00668C78

Stack trace:
PC = 0x0034D0D8, SP = 0x00704400
Frame 00: SP = 0x00704468    PC = 0x0014B718
Frame 01: SP = 0x00704488    PC = 0x001A451C
Frame 02: SP = 0x007044D8    PC = 0x00173184
Frame 03: SP = 0x00704520    PC = 0x0017ED80
Frame 04: SP = 0x00000000    PC = 0x001E9430

Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC9a, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 13-Jan-04 11:26 by antonino

Switch uptime is 6 minutes,
cisco WS-C3524-PWR-XL (PowerPC403) processor (revision 0x01) with
8192K/1024K bytes of memory.


C3500XL Boot Loader (C3500-HBOOT-M) Version 12.0(5)XU, RELEASE SOFTWARE (fc1)
Compiled Mon 03-Apr-00 17:47 by swati
 starting...
Base ethernet MAC Address: 00:02:7d:71:4e:c0
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 110 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 3612672
flashfs[0]: Bytes used: 2927104
flashfs[0]: Bytes available: 685568
flashfs[0]: flashfs fsck took 4 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading
"flash:/c3500xl-c3h2s-mz.120-5.WC9a.bin"...######################################################################################################################################################################################

File "flash:/c3500xl-c3h2s-mz.120-5.WC9a.bin" uncompressed and installed,
entry point: 0x3000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC9a, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 13-Jan-04 11:26 by antonino
Image text-base: 0x00003000, data-base: 0x0034E454


Initializing C3500XL flash...
flashfs[1]: 110 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 3612672
flashfs[1]: Bytes used: 2927104
flashfs[1]: Bytes available: 685568
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete.
...done Initializing C3500XL flash.
C3500XL POST: System Board Test: Passed
C3500XL POST: Daughter Card Test: Passed
C3500XL POST: CPU Buffer Test: Passed
C3500XL POST: CPU Notify RAM Test: Passed
C3500XL POST: CPU Interface Test: Passed
C3500XL POST: Testing Switch Core: Passed
C3500XL POST: Testing Buffer Table: Passed
C3500XL POST: Data Buffer Test: Passed
C3500XL POST: Configuring Switch Parameters: Passed
C3500XL POST: Ethernet Controller Test: Passed
C3500XL POST: MII Test: Passed
cisco WS-C3524-PWR-XL (PowerPC403) processor (revision 0x01) with
8192K/1024K bytes of memory.
Processor board ID FAA0430H0ZB, with hardware revision 0x00
Last reset from warm-reset

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:02:7D:71:4E:C0
Motherboard assembly number: 73-4033-06
Power supply part number: 34-0968-01
Motherboard serial number: FAA0429A78N
Power supply serial number: LIT04250020
Model revision number: A0
Motherboard revision number: B0
Model number: WS-C3524-PWR-XL-EN
System serial number: FAA0430H0ZB


Press RETURN to get started!


C3500XL INIT: Complete

00:00:19: %SYS-5-CONFIG: Configured from NVRAM by console
00:00:19: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC9a, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 13-Jan-04 11:26 by antonino
=== and here ===

-- 
Sorin CONSTANTINESCU
adonay at dumnez.eu.org
Linux Registered User #222086




More information about the cisco-nsp mailing list