[nsp] TCL Scripting on 7206

[Lupi, Guy]

You can activate commands at certain times using the command scheduler
feature in 12.3.  I have never used it but it seems that this is what you
are looking for.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_feature_guid
e09186a00801b0695.html

-----Original Message-----
From: Skeeve Stevens [mailto:skeeve at skeeve.org] 
Sent: Thursday, July 01, 2004 10:39 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] TCL Scripting on 7206



Anyone know much about TCLSH ?

I was trying to play with it but there is a couple of things I can't grasp.

1. I can go into tclsh and write code..   But how do I save it to a file,
run it and so on!

2. In conf te mode, the 'scripting' command is supposed to be valid.. But my
12.3(9) doesn't seem to support it.

3. Anyone know if the clock can interact and activate scripts at certain
times? Imagine changing default routes at certain times, shutting interfaces
at certain times and so on. awesomeness ;-)

.Skeeve


_______________________________________________________
Skeeve Stevens, RHCE     Email: skeeve at skeeve.org
Website: www.skeeve.org  - Telephone: (0414) 753 383
Address: P.O Box 1035, Epping, NSW, 1710, Australia

eIntellego - skeeve at eintellego.net - www.eintellego.net
_______________________________________________________
Si vis pacem, para bellum




_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/