[nsp] OC3 interfaces for 7xxx vs. other OC12 transport options

[Stephen J. Wilcox]

yes i think the PA-MC-STM-1 is capable of only muxing down into E1s

there is a PA-MC-T3 /2T3 card tho, so if you get an OC3, mux out 3x T3s you can 
break these out into 28x T1s each

On Tue, 13 Jul 2004, Clayton Zekelman wrote:

> 
> I can't find anything in the PA-MC-STM-1 docs that says it will do a T1 - 
> only E1.
> 
> I don't think there are any PA's for the North American market to take an 
> OC3 and break it down into 84 T1's, or Packet over DS3 interfaces.
> 
> 
> At 08:16 AM 13/07/2004, Thomas Kernen wrote:
> > > PA-MC-STM-1SMI or MM.
> > >
> > > Or does this only work on SDH and not on SONET?
> > >
> >
> >The PA-MC-SMT-1 works both on SDH and SONET. You can select it in the
> >controller configuration.
> >
> >lab(config-controller)#framing ?
> >   sdh    Use SDH Framing
> >   sonet  Use Sonet Framing (default)
> >
> >Note that you can also select the AUG mapping to AU-3 or AU-4
> >
> >Thomas
> 
> ---
> Clayton Zekelman
> Managed Network Systems Inc. (MNSi)
> 344-300 Tecumseh Rd. E.
> Windsor, Ontario
> N8X 5E8
> 
> tel. 519-985-8410
> fax. 519-258-3009 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>