[c-nsp] need help - issue with terminal/console

[Gert Doering]

hi,

On Mon, Jul 26, 2004 at 02:56:53PM -0400, Chris Hale wrote:
> We attempted to upload a config from one router to another via the flash
> card.  This worked successfully with the IOS, but once we did it with the
> running-config, we apparently screwed up the console.  Now all we get is
> jibberish ascii characters on the console or terminal.
> 
> Any ideas as to what caused this and how to remedy it?

Check the config-register (in "show version", if you still have access to
the router).  Some of the higher-order bits control the console baud rate.

0x2102 is the "normal" value for just about anything today.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de