[c-nsp] GTS and ATM (PA-A3-T3) on 7200

[Dan Armstrong]

Why don't you just setup the PVC as: 

vbr-nrt blahh blahh

That will shape the PVC at the ATM layer to whatever speed you desire.... 
works like  a charm.


Dan.



On Thursday 29 July 2004 10:48, Jon Lewis wrote:
> On Thu, 29 Jul 2004, Marko Milivojevic wrote:
> > interface atm2/0.1
> >  pvc 0/70
> >   service-policy output DOWNLOAD-SHAPE
> > !
> >
> >     Not only that it doesn't work, but the config is actually
> > dissapearing: interface ATM2/0.1 point-to-point
> >  pvc 0/70
> >   ubr 11500
> >   oam-pvc manage
> >   encapsulation aal5snap
> >  !
> > end
>
> I don't know if it's the same issue, but some time ago I found that I
> couldn't apply a rate-limiting or QoS service-policy to an ATM subint PVC
> unless the PVC was configured with vbr-nrt.  Without that, the
> service-policy command was accepted but did not become part of the config.
>
> ----------------------------------------------------------------------
>  Jon Lewis                   |  I route
>  Senior Network Engineer     |  therefore you are
>  Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/