[c-nsp] New to CCNA [ My first router 2501 :) ]

Fri Jul 30 07:35:48 EDT 2004

Hi!

Go to cisco.com and enter "%Error opening
tftp://255.255.255.255/network-confg" in the serch-box.
Read the first document found.

It tells you to do a "no service config"

/Fredrik

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Huzaifah Ahmed
Sent: Friday, July 30, 2004 1:23 PM
To: Cisco Mailling List [ Forum ]
Subject: [c-nsp] New to CCNA [ My first router 2501 :) ]
Importance: High

Hello everybody,

As you see I am new to Cisco and this is my first official post to this
list. :) I recently purchased a router from ebay and I am a lill un sure of
the errors shown below.

Can anyone advise me how to get rid of them. Will highly appreciate your
help.

Thank you in advance.

------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.0(14), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 31-Oct-00 23:59 by linda
Image text-base: 0x0302F438, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
SOFT
WARE (fc1)
2501A uptime is 4 hours, 4 minutes
System restarted by power-on
System image file is "flash:c2500-i-l.120-14"
cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of memory.
Processor board ID 26586640, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
-------------------------------- RELOAD COMMAND ---------------------
Proceed with reload? [confirm]
04:21:56: %SYS-5-RELOAD: Reload requested
System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 6144 Kbytes of main memory
%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be correctly
under
stood.
F3: 5656044+80240+423840 at 0x3000060

A LOT OF OTHER STUFF .................

cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of memory.
Processor board ID 26586640, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/2501a-confg (Timed out)
%Error opening tftp://255.255.255.255/2501a.cfg (Timed out)

Press RETURN to get started!

00:00:21: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:21: %LINK-3-UPDOWN: Interface Serial0, changed state to down
00:00:21: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed
sta
te to down
00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed
state
 to down
00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
state
 to down
00:00:26: %SYS-5-CONFIG_I: Configur
2501A>
----------------------------------------------------------------------------
---
These errors come in If I leave the router connection on console idle for a
long time.

2501A#
2501A#
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/2501a-confg (Timed out)
%Error opening tftp://255.255.255.255/2501a.cfg (Timed out)
2501A#

Huzaif Ahmed 
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

**********************************************************************************************************************
Confidentiality Notice

The content of this e-mail, including attachments, is intended for the confidential use of the individual(s) or entity(-ies) to whom it is addressed only and may contain personal and/or confidential information. Please notify the sender immediately by returning this e-mail if you are not the intended recipient. If you are not the intended recipient, you are hereby notified that you have received this communication in error and that reading, duplicating, or in any way disseminating its content to any other person, is strictly prohibited.

If the content of this e-mail, including attachments, includes an offer to provide any service or product, an offer or a solicitation of an offer to buy or sell any securities or any other investment product, please refer to the disclaimer on www.enskilda.se, which applies also to the content of this e-mail. Any such transaction will also be subject to any other Terms of Business currently in place between us.

If you are a client of Enskilda Securities with access to Enskilda Research Online and this e-mail contains a research report or the content of this e-mail, including attachments, may be regarded as an advice in relation to companies or securities, please refer to the general and company specific disclaimers, respectively, on Enskilda Research Online.
**********************************************************************************************************************