[nsp] Output errors on ATM interface

[Brian Mengel]

> -----Original Message-----
> From: Vincent De Keyzer [mailto:vincent at dekeyzer.net] 
> Sent: Wednesday, June 02, 2004 3:22 PM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] Output errors on ATM interface
> 
> 
> Hello,
>  
> I am seeing output errors on an ATM interface. What can be 
> the cause of
> those?...
>  
> Vincent
>  



>From CCO:

    * A packet is scheduled for transmission on a VC which is not in the
UP status.
    * A packet has an invalid or unrecognized virtual circuit descriptor
(VCD) number.
    * SAR fails to transmit cells to the framer.
    * A non-OAM packet uses a VCD value of 0, which is reserved for OAM
packets only. The output counter no longer increments in this condition
(CSCdp86348).
    * Other miscellaneous reasons, such as interaction with a particular
feature.

For the PA-A3-OC3 card (Enhanced ATM).  I'm assuming that you are either
using that or the PA-A1 (Lite ATM) card.