[nsp] Cisco Crashing

[james at thehamptonfamily.us]

What does a show stack give you when this happens?

James

> I have a 7206, with a 2 port Fast Ethernet Card, and an 8 port T1 card.
>
> I have my backhaul going out port F0/0, and I have T1's hooked up to the
> 8 port card.
>
> The problem is, I am trying to add a Paradyne DSLAM to the F0/1 port.
>
> Within minutes of plugging in the Ethernet cable, my router goes into
> cyclic rebooting.
>
> I get this in my crashinfo
>
> CMD: 'no crypto map NiStTeSt1' 11:39:42 UTC Wed May 26 2004
>
>
>
> CMD: 'no crypto map NiStTeSt1' 11:39:42 UTC Wed May 26 2004
>
>
>
> *May 26 11:39:43.316: %SYS-5-RESTART: System restarted --
>
> Cisco Internetwork Operating System Software
>
> IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.3(3), RELEASE SOFTWARE
> (fc2)
>
> Copyright (c) 1986-2003 by cisco Systems, Inc.
>
> Compiled Mon 18-Aug-03 21:11 by dchih
>
> *May 26 11:39:43.320: %SNMP-5-COLDSTART: SNMP agent on host nexus5 is
> undergoing a cold start
>
> *May 26 11:39:43.916: %SYS-6-BOOTTIME: Time taken to reboot after reload
> 157 seconds
>
> *May 26 11:39:44.184: %LINK-3-UPDOWN: Interface FastEthernet1/0, changed
> state to up
>
> *May 26 11:39:44.184: %LINK-3-UPDOWN: Interface FastEthernet1/1, changed
> state to up
>
> *May 26 11:39:44.204: %SSH-5-ENABLED: SSH 1.5 has been enabled
>
> *May 26 11:39:46.184: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet1/0, changed state to up
>
> *May 26 11:39:47.076: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet1/1, changed state to up
>
> %ERR-1-SERR: PCI bus system/parity error
>
>
>
> I've reseated all the cards, but it still happens. Where do I start?
>
>
>
> Anson Rinesmith
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/