[nsp] Monitor active calls

[M.Palis]

Problem is that by using the mib that you send me (I am using another one
with same results) returns an output what is different from the output of
the show isdn status which indicates exactly the number of timeslots that
are used. For example I may have an output of 40 used timeslots using the
mib that you send my but with the show ISDN status command  the total is 54
timeslots.

What we need to have  is the exact figure of the timeslots that are used
which I believe is the one that is outputted from the show ISDN status
command on the access-servers .


Output from show ISDN Status
Total Allocated ISDN CCBs = 54


Output from my mib (Found form CISCO Documents)
enterprises.9.10.19.1.1.4.0 = Gauge32: 40

Same result using your mibs
enterprises.9.10.19.1.1.9.1.3.0.0 = Gauge32: 15
enterprises.9.10.19.1.1.9.1.3.0.1 = Gauge32: 12
enterprises.9.10.19.1.1.9.1.3.0.2 = Gauge32: 0
enterprises.9.10.19.1.1.9.1.3.0.3 = Gauge32: 12



On As5350 using the same mibs, the output is exactly the same.

Best Regards

----- Original Message ----- 
From: "Tarko Tikan" <tarko at lanparty.ee>
To: <cisco-nsp at puck.nether.net>
Sent: Wednesday, June 09, 2004 6:51 PM
Subject: Re: [nsp] Monitor active calls


> hello!
>
> > I am looking for the mib in order to monitor the amount active calls on
> > AS5300 and AS5350 access-servers and use MRTG to graph the result. Can
> > anyone have the correct mib? I found some mibs but the output is
> > different than the actual.
>
> you can query 1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.X for active DS0 count per
> E1 (use X=0 for E1/0, X=1 for E1/1 etc.). For additional stuff download
> CISCO-POP-MGMT-MIB from cisco website.
>
> -- 
> tarko
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/