[nsp] ISDN interface in VRF

[Luis Miguel Cruz]

What command are you using to do the ping?
Please paste it.

khiz wrote:

>   Hi Guys,
> i am trying to implement an ISDN backup  from a CE to a PE , as simple as that 
> i hv put the corresponding interface on the PE side into the VRF.
>  IS there any special config required to put a BRI Interface into the VRF table.
> The iSDN is active and i am able to see the  connected routes routes in the VRF table
> 
> sh ip ro vrf  VPN    
> C       192.168.130.4/30 is directly connected, BRI3/0
>      10.0.0.0/24 is subnetted, 1 subnets 
> 
> however i cant ping the CE end of the ISDN 
> 
> 
> interface BRI3/0
>  ip vrf forwarding VPN
>  ip address 192.168.130.5 255.255.255.252
>  no ip redirects
>  no ip proxy-arp
>  encapsulation ppp
>  load-interval 30
>  dialer idle-timeout 3600
>  dialer string 21222040
>  dialer-group 1
>  isdn switch-type basic-net3
>  no peer default ip address   
> 
> 
> dialer-list 1 protocol ip permit  
> 
> THis is
> IOS (tm) 3600 Software (C3660-P-M), Version 12.2(24), RELEASE SOFTWARE (fc1)
> 
> am i missing something??
> 
> RGds
> Knms
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>