[nsp] Monitor temperature on Cisco 2950 switch

[lee.e.rian at census.gov]

Arnold Nipper wrote:

> On 16.06.2004 17:35 Pal, Laszlo wrote:
>
> > Is there any in Catalyst 6500 switches?
>
> yes
>
> 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1001&1.3.6.1.4.1.9.9.91.1.1.1.1.4.1002 <-
> Module 1
> ...
> 1.3.6.1.4.1.9.9.91.1.1.1.1.4.7001&1.3.6.1.4.1.9.9.91.1.1.1.1.4.7002 <-
> Module 7
>
>
> Arnold

For the numerically challenged among us, that would be
CISCO-ENTITY-SENSOR-MIB::entSensorValue

Also note that line card temperature alarm traps are not enabled by
default.  Or at least not on 5.x code.  No cli commands to enable those
traps either.  Every time the switch reboots you have to use SNMP to set
all of the entSensorThresholdNotificationEnable MIB vars to true(1) if you
want traps about individual line cards overheating.

Lee