[nsp] bridging solution.

[Messina, John V.]

                  Site A
Site B                                                     
     6500<<<>>>>7206----WAN---T3---WAN-------7206-------|
        |
192.168.9.0                                      
192.168.9.0                   
 
 
I have the above topology. I want to assign a few switchports on the
6500 (IOS) in site A to the same network that exists across the wan off
of a 7206. The network is curently assigned to the FE interface of the
7206 in site B. 192.168.9.0 is the network. What would be the best way
too accomplish this without a tremendous amount of reconfiguration. The
6500 currenlty has about 12 vlans on it and this whole network is all 1
eigrp domain. There are other sites so bascially what I want is any
traffic destined for 192.168.9.10, .11 and .12 to be reachable via a few
switchports in site A and all other traiffic for the 192.168.9.0 network
to be reachable via normal eigrp routing in site B. 
 
Thanks
 
 
 
John