[nsp] Lotus replication ??mtu problem

Sun Jun 20 11:58:36 EDT 2004

k> Date: 20 Jun 2004 15:32:39 -0000
k> From: khiz   <khiznms at red...>

k> can i do something on the CE and or PE router to solve the MTU
k> issue?

What does

	show mpls interfaces detail

tell you?  MTU should be at least 1500.  When running FRF.16/MFR
on 12.3T, the actual MTU was four bytes smaller than stated.

What ethernet switches are you using?  Some switches support
1518-octect frames *iff* the packets are ethertype 0x8100, but
otherwise are limited to 1514 octets.  (I'm excluding CRC octets
from frame sizes.)

Eddy
--
EverQuick Internet - http://www.everquick.net/
A division of Brotsman & Dreger, Inc. - http://www.brotsman.com/
Bandwidth, consulting, e-commerce, hosting, and network building
Phone: +1 785 865 5885 Lawrence and [inter]national
Phone: +1 316 794 8922 Wichita
_________________________________________________________________
DO NOT send mail to the following addresses:
davidc at brics.com -*- jfconmaapaq at intc.net -*- sam at everquick.net
Sending mail to spambait addresses is a great way to get blocked.