[nsp] APS manual switchover

[Dmitry Volkov]

What is the difference between "aps force" and "aps manual" ?
it takes about 30 sec if I do switchover manually on 7500 POS OC3. Is it
normal ?
Here config:

interface POS1/1/0
 no ip address
 encapsulation frame-relay IETF
 load-interval 30
 pos scramble-atm
 pos flag c2 22
 aps working 1
 frame-relay lmi-type ansi
!
interface POS1/1/0.1 point-to-point
 ip address 1.1.1.1 255.255.255.252
 frame-relay interface-dlci 100
!
interface POS4/1/0
 no ip address
 encapsulation frame-relay IETF
 load-interval 30
 pos scramble-atm
 pos flag c2 22
 aps signalling sonet
 aps revert 5
 aps protect 1 10.200.239.8
 frame-relay lmi-type ansi
!
interface POS4/1/0.1 point-to-point
 ip address 1.1.1.1 255.255.255.252
 frame-relay interface-dlci 100
!
interface Loopback1
 ip address 10.200.239.8 255.255.255.255

Thanks,
Dmitry