[nsp] 7206vxr/npe-300 reboot

[Yuval Ben-Ari]

> I just had a 7206vxr/npe-300 reboot, and it came up with this:
> 
>   System returned to ROM by error - an Error Interrupt, PC 0x60555AE4 
> 
> Minutes later, it rebooted a second time and came up with this:
> 
>   System returned to ROM by bus error at PC 0x60538230, 
> address 0x20000014
> 
> I was running 12.0(25)S1.  The first reboot came back up with
> 12.0(25)S1, but the second reboot came up with my backup 
> image: 12.0(25)S.
> 
> While I do have oob console access to the router, I don't have a
> history, so can't see why it crapped out on the second reboot
> of the S1 image.
> 
> Am I running the wrong IOS (12.0(25)S1)?   That is, did I miss
> an important cisco announcement?

this is not a too old image, and even if it is, it should not cause
router to crash.
try to see if there is crashinfo on the bootflash: it could point you to
the cause of the crash
check this also:
<http://www.cisco.com/en/US/partner/products/hw/routers/ps341/products_t
ech_note09186a008009446a.shtml>
(requires CCO login)
 
> Thanks,
> -mark
>  
>