[nsp] PA-MC-T3 and 7206 non-VXR

[jlewis at lewis.org]

On Fri, 19 Mar 2004, Adam Maloney wrote:

> I have a customer that is buying a 7206 (non-VXR) with an NPE-200 and
> wants an MC-T3 in it.
>
> His cisco reseller says that the card only works in VXR chassis that
> have an NPE-300 or better.  The reseller says they've talked to a few
> different "experts" and they are all confirming that this card won't
> work with that chassis.

I've used the (multiple actually) PA-MC-T3 cards in a non-VXR chassis.

cisco 7206 (NPE225) processor (revision A) with 245760K/16384K bytes of
memory.
Processor board ID 23683557
R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
6 slot midplane, Version 1.3

Slot 3:
        CT3 single wide Port adapter, 1 port
        Hardware revision 1.0           Board revision A0
        Serial number     11523005      Part number    73-3037-01
Slot 5:
        CT3 single wide Port adapter, 1 port
        Hardware revision 1.0           Board revision A0
        Serial number     16091283      Part number    73-3037-01
Slot 6:
        CT3 single wide Port adapter, 1 port
        Hardware revision 1.0           Board revision A0
        Serial number     16090961      Part number    73-3037-01

----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________