[nsp] single-col, multi-col, 6509

[Steve Francis]

matthew zeier wrote:

>I can't (easily) find from cisco's site what Single-Col and Multi-Col mean.
>I do know that on this port each are increasing.
>
>Port  Single-Col Multi-Coll
>----- ---------- ----------
> 9/11     634745     100903
>  
>
Single collisions and multipl-collisions in attempting to send the same 
frame.

Assuming this port is supposed to be half duplex, nothing it wrong.
If the rate of collisions is higher than you like, switch to full duplex 
or higher speed link.

>
>--
>matthew zeier                        | "Nothing in life is to be feared.
>InteleNet Communications, Inc.       |  It is only to be understood."
>(949) 784-7904                       |       - Marie Curie
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>