[nsp] How to make netflow only collect statistics of one port ofC6509?

[Anning, Mike]

It's a  daughter board that sits on the Supervisor Module.

This is for the Supervisor IV
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_shee
t09186a008019742a.html#wp46286


Hope it helps
Cheers
Mike
-----Original Message-----
From: Jing Shen [mailto:jshen at sjfj.hz.zj.cn] 
Sent: 24 March 2004 23:52
To: cisco-nsp at puck.nether.net
Subject: [nsp] How to make netflow only collect statistics of one port
ofC6509?


I want to set up netflow on Catalyst6509 to monitor uplink traffic.
 
But I found the document only give example of filtering with network
layer information.
 
How could I do it?
 
another question, does Catalyst4006 (4506) require special line card to
enable netflow?
 
thanks
 
 
 
Jing Shen 
Data Communication Center
HangZhou TeleCommunication Corp. Ltd.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/