[nsp] failing 1605

[Roger]

I havea 1605 thats been rebooting on me lately.  I've replaced the power 
supply but once I saw the info from 'show version' I think the router 
itself might be bad.  Note the software force crash.

This router does debugging level logging to a syslog server, w/ nothing 
out of the ordinary showing up. 

Does anyone have any insight to the error?  I'm thinking of replacing 
the stick of ram in the router.  If not I'll have to pitch the entire 
unit?  The version of IOS were running on a number of 1605 and it seems 
to work just fine so I don't know/think a IOS upgrade will do any good - 
but I'm not adverse to tring..  Suggestions?

Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-OY-M), Version 12.2(17a), RELEASE SOFTWARE 
(fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 19-Jun-03 10:11 by pwade
Image text-base: 0x02005000, data-base: 0x026C3F48

ROM: System Bootstrap, Version 11.1(12)XA, EARLY DEPLOYMENT RELEASE 
SOFTWARE (fc1)
ROM: 1600 Software (C1600-RBOOT-R), Version 11.1(12)XA, EARLY DEPLOYMENT 
RELEASE SOFTWARE (fc1)

evac uptime is 3 days, 14 hours, 27 minutes
System returned to ROM by error - software forced crash, PC 0x213043A
System restarted at 03:58:31 CST Wed Mar 24 2004
System image file is "flash:c1600-oy-mz.122-17a.bin"

cisco 1605 (68360) processor (revision C) with 22528K/2048K bytes of memory.
Processor board ID 09179941, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
System/IO memory with parity disabled
8192K bytes of DRAM onboard 16384K bytes of DRAM on SIMM
System running from RAM
7K bytes of non-volatile configuration memory.
16384K bytes of processor board PCMCIA flash (Read/Write)

Configuration register is 0x2102

-- 
Rock River Internet                          Roger Grunkemeyer
202 W. State St, 8th Floor                grunky at rockriver.net
Rockford, IL 61101                                815-968-3888