[nsp] PA-2FE-TX NOT SHOWING UP/ERRORS

[Mike Carter]

Please let me know if you have suggestions on this one...show ver is below.
TIA

Here's the error I'm getting:

00:00:58: %VIP-3-PCI_BUS0_PARITYERROR: VIP2 slot1 : PCI bus 0 parity error.
00:00:58: %VIP-3-PCI_BUS1_PARITYERROR: VIP2 slot1 : A PCI bus 1 parity
error. .
00:00:58: %PA Bay 0 Upstream PCI-1-I Bridge, Handle=0: VIP2 slot1 :
00:00:58: %DEC21050 bridge chip, config=0x0-1-: VIP2 slot1 :
00:00:58: %(0x00)-1-: VIP2 slot1 : ev, vendor id       = 0x00011011
00:00:58: %(0x04)-1-: VIP2 slot1 : tatus, command      = 0x02800147
00:00:58: %(0x08)-1-: VIP2 slot1 : lass code, revid    = 0x06040002
00:00:58: %(0x0C)-1-: VIP2 slot1 : dr, lat timer, cls  = 0x00010000
00:00:58: %(0x18)-1-: VIP2 slot1 : ec lat,cls & bus no = 0x00010100
00:00:58: %(0x1C)-1-: VIP2 slot1 : ec status, io base  = 0x83807020
00:00:58: %         Detected Parity Error  on secondary bus-1-: VIP2 slot1 :
00:00:58: %         Data Parity Detected   on secondary bus-1-: VIP2 slot1 :
00:00:58: %(0x20)-1-: VIP2 slot1 : em base & limit     = 0x01F00000
00:00:58: %(0x24)-1-: VIP2 slot1 : refetch membase/lim = 0x0000FE00
00:00:58: %(0x3C)-1-: VIP2 slot1 : ridge ctrl          = 0x00030000
00:00:58: %(0x40)-1-: VIP2 slot1 : rb/serr, chip ctrl  = 0x00100000
00:00:58: %(0x44)-1-: VIP2 slot1 : ri/sec trgt wait t. = 0x00000000
00:00:58: %(0x48)-1-: VIP2 slot1 : ec write attmp ctr  = 0x00FFFFFF
00:00:58: %(0x4C)-1-: VIP2 slot1 : ri write attmp ctr  = 0x00FFFFFF
00:01:00: %VIP-3-SVIP_RELOAD: VIP2 slot1 : SVIP Reload is called.
00:01:00: %VIP-3-SYSTEM_EXCEPTION: VIP2 slot1 : VIP System Exception
occurred sig=22, code
=0x0, context=0x60985948

00:01:11: %CBUS-3-CCBPTIMEOUT: CCB handover timed out, CCB 0x5800FF30, slot
1
-Traceback= 603A59B4 603A2E98 603A34F4 6039A480 603137B0 6025C184 6025C390
602F1734 602F17
20
---------------------------------------END----------------------------------
---
Here's the show ver from the router without the VIP (had to remove it)
installed.

Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV56I-M), Version 12.1(12c)E1, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 07-Aug-02 23:51 by eaarmas
Image text-base: 0x60010958, data-base: 0x61890000

ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
BOOTLDR: RSP Software (RSP-JSV56I-M), Version 12.1(12c)E1, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)

smcoe-lan uptime is 1 day, 22 hours, 51 minutes
System returned to ROM by reload at 10:32:16 UTC Sun Mar 28 2004
System image file is "slot0:rsp-jsv56i-mz.121-12c.E1.bin"

cisco RSP4+ (R5000) processor with 131072K/2072K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Bridging software.
TN3270 Emulation software.
Chassis Interface.
1 EIP controller (6 Ethernet).
1 FEIP2 controller (2 FastEthernet).
2 VIP4-80 RM7000 controllers (2 GigabitEthernet).
6 Ethernet/IEEE 802.3 interface(s)
2 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
123K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
16384K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 3.
Configuration register is 0x2102
-------------------------------------END------------------------------------
----

Michael Carter
Sun/Cisco/IBM Sales
Alta Technologies
763-475-5327  (direct)
800-546-2582  (Ext. 327)
763-475-5331 (fax)
AOL instant messenger  mikec at alta
email  mike.c at altatechnologies.com
Website  www.altatechnologies.com


 ***To be removed from this mailing list simply reply with remove in the
subject line***