[nsp] Locally terminate traffic into a TE tunnel (act as PE and CE in a single router)

[Temkin, David]

Does anyone know if it's possible to act as both a MPLS CE and PE in the
same router in the following way:

		       		       PtP MPLS Link
Local IP Traffic---------------> Router
--------------------------------> Router--------------------->Local IP
traffic
	|		       |	           TE Tunnel	   |
	|		       |				   |
	|		       |	 	Redundant link	   |
	
|------------------------------|-Router------------------------------>Ro
uter------------------->Local IP Traffic
				


I apologize for the horrible ASCII, but basically I want IP traffic
that's actually routed to the router to get mapped into a tunnel that
terminates on the far side and gets mapped out of the tunnel, with no
real MPLS network in between (just router to router links).  Any sample
configs would be appreciated.

-Dave

IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments.  Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited.  Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument.  Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses.