[nsp] Finding the bandwith hog

[Burton Windle]

I have three 3524XL switches connected to a 3640 router, which then
connects to the Internet.

I am looking for a way to find the switch port/IP address of computers
that are using the most bandwidth.

Right now I telnet to each switch and do a 'show int' and look for which
switchport has a high 5-minute input rate, but there has to be a
quick/easy way to do this; graphing each switch port in MRTG is not a
valid solution.

Thanks for any pointers you can give.

--
Burton Windle                           bwindle at fint.org