[nsp] isdn channels

[Roger]

Greg Goodknight wrote:

>assuming you meant "I'd like to be able to specify that channel 1 is for
>data only and channel 2 is for voice only"...
>
>try
>"dialer load-threshold 255 either"
>
>should keep the second channel from ever being dialed for the data call and
>will not tie up the remote site's voice line, unless you can keep 100% line
>utilization long enough to trigger it and keep it up. As far as I can tell
>the dialer will choose channel 1 by default for the data call.
>
>  
>
 From my experience that won't work.  When(not if) the channel becomes 
saturated it will use the other channel to dial leaving no channels for 
voice.  I *believe* putting

no ppp multilink

in the dialer 1 interface will prohibit the dialer from using both 
channels - however it will not specify which channel.

-- 
Rock River Internet                          Roger Grunkemeyer
202 W. State St, 8th Floor                grunky at rockriver.net
Rockford, IL 61101                           815-968-9888 x102