[nsp] Rate - limiting

Paul Stewart pauls at nexicom.net
Thu May 20 14:01:27 EDT 2004


Where were you looking at rate-limiting the ports?  At your edge, at your
core or in distribution?  Please describe a little more about what you are
looking to accomplish and/or why you need rate limiting?

Thanks,

Paul Stewart
Network Solutions Specialist
Nexicom Inc.
 
(705)932-4127 Voice
(705)932-2329 Fax
1-888-639-4266 x927 Toll Free
http://www.nexicom.net

This message, including attachments, is confidential and may be privileged.
If you are not an intended recipient, please notify the sender then delete
and destroy the original message and all copies. You should not copy,
forward and/or disclose this message, in whole or in part, without
permission of the sender


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, May 20, 2004 1:56 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] Rate - limiting


What devices are other ISPs using for rate limiting on FastEthernet ports?
>From other threats I have gathered that cisco only works on ingress.  Does
any of the cisco gear work for both ingress and egress?

 

TIA

 

Scott

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list