[nsp] Multicast?...

[Charles Sprickman]

On Tue, 18 May 2004, Vincent De Keyzer wrote:

> Hello,
>
> I will start my own research now, but since this is kind of urgent I thought
> I would ask you guys if you can help with a few lines of Cisco CLI...

Recent experience has shown that the following works in a "simple" config
like that:

ip multicast-routing
ip pim rp-address (one of you loopbacks)

on each interface:

ip pim sparse-mode

>From what I gather, sparse mode is preferred as it doesn't flood stuff
everywhere.

The problems I was having seemed to center around the box running the
encoder (Windoze Media Server).

Charles

> I have
>
> *	a camera + encoder at 10.20.30.2/24
> *	a 7206 VXR with Fa0/0.518 = 10.20.30.1/24 and Fa0/0.519 =
> 10.30.50.1/24
> *	a decoder + television at 10.30.50.2/24
>
> I can ping the decoder from the encoder.
>
> Now it seems that I need to create/enable/use (?) the "multicast stream
> 224.0.1.250" in order for the images of the camera to appear on the TV.
>
> Anyone has a clue on how to do this?...
>
> Thanks in advance,
>
> Vincent
>
> PS: IOS is "IOS (tm) 7200 Software (C7200-P-M), Version 12.2(13), RELEASE
> SOFTWARE (fc1)". Maybe not the most appropriate?...
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>