[nsp] Multicast?...

[Kristofer Sigurdsson]

Hello,

Vincent De Keyzer, Tue, May 18, 2004 at 04:01:41PM +0200 :
> Hello,
>  
> I will start my own research now, but since this is kind of urgent I thought
> I would ask you guys if you can help with a few lines of Cisco CLI...
>  
> I have 
> 
> *	a camera + encoder at 10.20.30.2/24
> *	a 7206 VXR with Fa0/0.518 = 10.20.30.1/24 and Fa0/0.519 =
> 10.30.50.1/24
> *	a decoder + television at 10.30.50.2/24
> 
> I can ping the decoder from the encoder.
>  
> Now it seems that I need to create/enable/use (?) the "multicast stream
> 224.0.1.250" in order for the images of the camera to appear on the TV.
>  
> Anyone has a clue on how to do this?...

You will have to turn on multicast routing on your router and you probably
have to configure CGMP and PIM aswell;

ip multicast-routing (configure mode)

ip cgmp (interface configure mode)
ip pim (interface configure mode)

All of these commands have further options.  We've been using ip pim sparse-dense-mode,
but the others just using the defaults.

Hope this will be of some help.

-- 
Kristófer Sigurðsson			Tel: +354 525 4103 / MSN: ks at rhi.hi.is
Netsérfræðingur/Network specialist	Reiknistofnun HÍ/University of Iceland