[nsp] Cat6500 Span limits and VACL to capture

[Steve Francis]

Carles Fragoso i Mariscal wrote:

>
>Secondly, I have been told that there is a way of doing a L2 VACL that
>allows to forward ACL-matched traffic to a span port. Anyone has done
>it and could give me an example on that?
>
>I have tried defining an 'vlan access-map' and applying it with 'vlan 
>filter' but I can't find the way of setting the destination span.
>Is it possible to apply it on a L2 port instead of VLAN basis?
>  
>
switchport capture
on the destination port.

>Thanks in advance to everyone,
>____________________________________________________
>          __
>         / /          Carles Fragoso i Mariscal
>   C E / S / C A   Communications & Operations Dept.
>       /_/              <cfragoso at cesca.es>
>
>           Supercomputing Center of Catalonia
>     	    CATalonia Neutral Internet eXchange
>          Tlf: +34932056464  Fax: +34932056979
>___________________________________________________
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>