[nsp] System was restarted by bus error at PC 0x0

James Edwards hackerwacker at cybermesa.com
Thu May 27 15:07:55 EDT 2004


I am working with a remote client, the router is crashing every 2 hours
or so. The bootflash was filled with old crash info, just did a squeeze
and captured another and am moving it to me right now.

I don't have access to cisco tools for a few weeks, could someone
give me an idea where these errors are happening ?

They swapped line cards into another 7206 and are still having
the below errors.
 



Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-P-M), Version 12.2(10b), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 11-Jul-02 22:09 by pwade
Image text-base: 0x60008940, data-base: 0x61088000
 
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(2)XE2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
 
metronet-1 uptime is 2 hours, 16 minutes
System returned to ROM by bus error at PC 0x0, address 0x0 at 15:49:41
UTC Thu May 27 2004
System image file is "slot0:c7200-p-mz.122-10b.bin"
 
cisco 7206VXR (NPE300) processor (revision B) with 229376K/65536K bytes
of memory.
Processor board ID 14534708
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
Cache
6 slot VXR midplane, Version 2.0
 
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
Primary Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
23 Serial network interface(s)
2 ATM network interface(s)
8 Channelized T1/PRI port(s)
125K bytes of non-volatile configuration memory.
 
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
 

metronet-1#sho context
 
System was restarted by bus error at PC 0x0, address 0x0 at 15:49:41 UTC
Thu May 27 2004
Fault History Buffer:
7200 Software (C7200-P-M), Version 12.2(10b), RELEASE SOFTWARE (fc1)
Compiled Thu 11-Jul-02 22:09 by pwade
Signal = 10, Code = 0x8, Uptime 08:26:23
$0 : 00000000, AT : 61C60000, v0 : 61C60000, v1 : 61C60000
a0 : 0E19B760, a1 : 0E19B798, a2 : 61A3CFF0, a3 : BEEFCAFE
t0 : 61F49D08, t1 : 80007CE0, t2 : 3400C100, t3 : FFFF00FF
t4 : 60639B28, t5 : 0000001E, t6 : 00000000, t7 : 6201AA28
s0 : 00000000, s1 : 00000000, s2 : 00000000, s3 : 00000000
s4 : 00000000, s5 : 00000000, s6 : 00000000, s7 : 00000000
t8 : 6201A938, t9 : 00000000, k0 : 61CE8AFC, k1 : 6063C5C8
gp : 61A44C20, sp : 00000028, s8 : 00000000, ra : 00000000
EPC : 00000000, SREG : 3400FF03, Cause : 00000008
Error EPC : FFAA9E4F, BadVaddr : 00000000
 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20040527/dd2ca060/attachment.bin


More information about the cisco-nsp mailing list