[nsp] NPE-225 boot code not loading on 7206 NON-VXR

[Gert Doering]

Hi,

On Thu, May 27, 2004 at 12:09:00PM -0400, Chris Hale wrote:
> I noticed the boot code on a NPE-225 w/ IO-2FE won't load, and we have to
> use rommon to load the router every time.  Is there a free upgrade to get
> this old version of the NPE-225 swapped out to a newer firmware version?

Never heard of such issues.  How does the boot phase look like?

> Any ideas?  Also - what's the config-register supposed to be set at if I
> want it to look at the config for the location of the image to load?
> 
> I have 0x2101 right now.

"Standard" value for the config-register is 0x2102.  You can change
individual bit values from the boot monitor with the "confreg" command.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de