[nsp] NPE-225 boot code not loading on 7206 NON-VXR

[Patrick Coppinger]

What version boot code are you using?

We don't have any NPE-225s in our network, but I did notice during a recent 
slew of upgrades that nothing past 12.0(24)S5 would work as boot code for 
our NPE-300s. Attempting to use 12.0(25)S1 would dump the boxes to rommon.

At 12:09 PM 5/27/2004 -0400, Chris Hale wrote:
>I noticed the boot code on a NPE-225 w/ IO-2FE won't load, and we have to
>use rommon to load the router every time.  Is there a free upgrade to get
>this old version of the NPE-225 swapped out to a newer firmware version?
>
>
>
>I saw something on Cisco's website about needing to be at v1.3 or higher on
>the firmware.
>
>
>
>Any ideas?  Also - what's the config-register supposed to be set at if I
>want it to look at the config for the location of the image to load?
>
>
>
>I have 0x2101 right now.
>
>
>
>Chris
>
>
>
>----------------------------------------------
>
>Chris Hale
>
>Peak Networks, Inc.
>
>http://www.peaknetworks.com
>
>800-PEAK-987
>
>chris at peaknetworks.com
>
>Motorola ACSP, Alvarion AIR, Certified Orthogon, Redline, Cisco, Terabeam
>Partners.
>
>
>
>
>
>
>
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/

Patrick Coppinger
Network Engineer, CCNP
Earthlink, Inc
(404) 748-7454 x22454 desk
(678) 592-7041 cell
pcoppinger at corp.earthlink.net