[nsp] NPE-225 boot code not loading on 7206 NON-VXR

[Rafi Sadowsky]

## On 2004-05-27 12:09 -0400 Chris Hale typed:

CH> I noticed the boot code on a NPE-225 w/ IO-2FE won't load, and we have to
CH> use rommon to load the router every time.  Is there a free upgrade to get
CH> this old version of the NPE-225 swapped out to a newer firmware version?
CH> 

 Maybe this is because C7200-I/O-2FE/E isn't not supported on non-VXR 720X ?


From: 
 <http://www.cisco.com/en/US/products/hw/routers/ps341/products_data_sheet09186a0080088724.html>

Product System Requirements
Hardware Requirements

Chassis compatibility—The C7200-I/O, C7200-I/O-GE+E, and the

 C7200-I/O-2FE/E are supported on the Cisco 7200 Series VXR chassis.
 The C7200-I/O is also supported on the Cisco 7200 Series (non-VXR) chassis.

-- 
HTH,
	Rafi

CH>  
CH> 
CH> I saw something on Cisco's website about needing to be at v1.3 or higher on
CH> the firmware.
CH> 
CH>  
CH> 
CH> Any ideas?  Also - what's the config-register supposed to be set at if I
CH> want it to look at the config for the location of the image to load?
CH> 
CH>  
CH> 
CH> I have 0x2101 right now.
CH> 
CH>  
CH> 
CH> Chris
CH> 
CH>  
CH> 
CH> ----------------------------------------------
CH> 
CH> Chris Hale
CH> 
CH> Peak Networks, Inc.
CH> 
CH> http://www.peaknetworks.com
CH> 
CH> 800-PEAK-987
CH> 
CH> chris at peaknetworks.com
CH> 
CH> Motorola ACSP, Alvarion AIR, Certified Orthogon, Redline, Cisco, Terabeam
CH> Partners.
CH> 
CH>  
CH> 
CH>  
CH> 
CH>  
CH> 
CH>  
CH> 
CH> 
CH>