[c-nsp] Can Cisco 2600 be an access server ?

[Josh Duffek]

Here is a sample config for what you want to do:
http://www.cisco.com/warp/public/793/access_dial/pppdialup.html

If you use analog modems the fastest you can expect is around 33.6.

Thanks,

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Aime
> Sent: Saturday, October 30, 2004 3:53 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Can Cisco 2600 be an access server ?
> 
> All,
> 
> I have a cisco 2600 with an "ASYNC 32A interface"
> installed in.
> 
> Can i use it as an access server for dial-in ?.
> Let say i want to be a small isp.
> 
> Thanks in advance
> 
> --Aimé
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/