[c-nsp] Cisco 7200 and Cisco 1005

[sthaug at nethelp.no]

> Is it possible to connect a Cisco 7200 (V.35) to a Cisco 1005 via a
> DB60 to V.35 cable.
> I've looked at http://www.cisco.com/en/US/tech/tk713/tk317/technologies_configuration_example09186a00800944ff.shtml
> But from the info gathered there I have to use a DCE and DTE WAN interface.
> It's not possible at all to connect two female serial ports on those equipment?

It's "all in the cables". You need one normal (DTE) V.35 cable and one
DCE V.35 cable. You need to connect the DCE cable to the 7200 since I
don't believe a 1005 can supply clocking (needs to be done by the router
at the DCE end).

With one DCE and one DTE cable, you should have no problem connecting a
7200 to a 1005.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no