[c-nsp] Cisco 7200 and Cisco 1005

[-soiledhalo-]

Steinar, Gert.
Thank you for your informative responses.
I now believe I understand...
On the 7200, I will get a DB60 to V.35 DCE cable which in this case
will be CAB-V35FC and on the 1005 I will make it a DTE device by using
CAB-V35MT.

Best regards,
-soiledhalo-


On Mon, 01 Nov 2004 19:54:52 +0100, sthaug at nethelp.no <sthaug at nethelp.no> wrote:
> 
> 
> > Is it possible to connect a Cisco 7200 (V.35) to a Cisco 1005 via a
> > DB60 to V.35 cable.
> > I've looked at http://www.cisco.com/en/US/tech/tk713/tk317/technologies_configuration_example09186a00800944ff.shtml
> > But from the info gathered there I have to use a DCE and DTE WAN interface.
> > It's not possible at all to connect two female serial ports on those equipment?
> 
> It's "all in the cables". You need one normal (DTE) V.35 cable and one
> DCE V.35 cable. You need to connect the DCE cable to the 7200 since I
> don't believe a 1005 can supply clocking (needs to be done by the router
> at the DCE end).
> 
> With one DCE and one DTE cable, you should have no problem connecting a
> 7200 to a 1005.
> 
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no